Payment & Shipping Terms:
|Laser Wavelength:||1064nm||Laser Source:||Fiber|
|Marking Speed:||9000m/s||Power Consumption:||200W|
|Laser Power:||70W||Technical Support:||Whole Life|
stainless steel laser engraving machine,
3d laser engraving machine for metal
LD-MK4070 70W 3D Fiber Laser Marking Machine For Metal Tools and Plastic Components
The Fiber laser marking machine adopts the top laser technology in the world wide. The fiber laser outputs the laser and scanner system finishes the scanning process. The fiber laser is air cooled, and it has the advantage of high electric-optic efficiency, small in size, good beam quality and high reliability. It can mark on all kinds of metal surfaces and some of the non-metal surfaces. Suitable for processing the need engraving, smoothness and accuracy, such as barcode, two-dimension code, graph and character marking. We can supply the fiber laser marking machine at 10W, 20W, 30W, 50W, 60W or more, also we can make the machine at the customer’s required technological data.
1). Excellent laser beam quality: Compared with traditional solid laser marking machine, fiber laser marking machine use base module (TEMOO) output, diameter of focal spot is less than 20um. Divergence angle is only 1/4 of semi-conductor pumping Laser. It is special suitable for precision marking.
2). Maintenance-free, long service life:Small wastage, high stability, not be affected by the outside dirt, steam and mechanism loosed, can be normal used under the abominable environment, such as high concussion, high temperature and dust, etc. using laser diode as the pumping source, totally enclosed type light path design. mean-time to double failure is over 100 thousand hours.
3). Fast processing speed:Its processing speed is 2-3 times of traditional laser marking machine.
4). Low processing cost: Optical-electric transferring efficiency is 30%, power consumption is less than 200 W, which is only 1/20 of light-pumped solid-state laser marking machine, greatly saving energy expenditure for long term usage.
5). Maintenance Free: No need maintenance of laser medium. Do not need adjust or clean the lens.
Widely used in industries of plastic key-press, Silicon Rubber key-press, communication, electronics, vehicle parts, IT, IC, precise accessories or metal products, electric appliance, glasses, watch and clocks, apparatus, or art craft, etc.
|Model No.||LD-MK4070 Fiber Marking Machine|
|Beam quality M2||<1.5|
|Adjusting Q frequency||20—100KHz|
|Marking range (mm)||100×100(can be enlarged at 160×160 or 380x380 area)|
|Min line width||0.008mm|
|Power supply||220V±22V / 50Hz / 7A|
|Overall power consumption||200W|
|Main machine dimension||1100X600X810 mm|
|Weight of Whole machine||160KG|
|Control system dimension||Integration|
Key Components of the machine:
Fiber laser adopts IPG from U.K.
Laser scanner head imported from Germany
Red light for fixed marking location and foot switch
Auto focus equipment (Optional)
Contact Person: Collins Zhang